27
3.3.7.4 Damper Adjustment
The insert has an internal damper to compensate for taller chimney installations. The damper is set
at the factory for installations with up to 13' of vent (Figure 22).
To adjust damper:
1.
Open the decorative doors
2.
Loosen, but do not remove, actuator lock screw.3.
3.
Pull or push the actuator to the required setting for your vent length (see Table 3).
4.
Tighten actuator lock screw and close the decorative doors.
CHIMNEY
HEIGHT
ACTUATOR
POSITION
FLUE
RESTRICTION
11’ A
LESS
18’ C
24’ E
26’ G
28’ I
30’ K
MORE
TABLE 3
Figure 22
ACTUATOR
ACTUATOR
LOCK SCREW
Summary of Contents for SATURNA
Page 7: ...7 2 2 Lighting instructions...
Page 17: ...17 Figure 11...
