ORTEC radEAGLE User Manual Download Page 79

Page: 79 / 147

radEAGLE

User Manual

radEAGLE

Advanced Menu

Figure 91:

No Internet connection

If there is a connection, you can specify which type of ﬁles to mail (Fig.

, p.

Figure 92:

File types for mailing

From the list of available ﬁles you can select those to be included in the mail attachment
(Fig.

, p.

Send

Send the marked ﬁles. The ﬁles will be combined into a

*.zip

archive and sent as

an attachment to the address you speciﬁed (

5.6

, p.

). You have to conﬁrm (Fig.

) and will be informed about success.

Select

Select the highlighted item.

Down

Highlight the next item. Cycles to the top item after you reached the last item.

Exit

Return to the superior screen.

© innoRIID GmbH • 2019-04-11

Software 3.2.12 • Document 3.3.0o

79/147

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands