ORTEC radEAGLE User Manual Download Page 33

Page: 33 / 147

radEAGLE

User Manual

radEAGLE

Measuring Modes

Detect

Switch to the Detect mode, see

3.3

, p.

Advanced

Open the menu for advanced operations, see

, p.

3.2

Easy ID Mode

The Easy ID measuring mode helps you to quickly identify radiating nuclides. Your

radEAGLE

will acquire a spectrum for a preset duration and then analyze and save it.

During the acquisition, a chart (Fig.

, p.

) instructs you to ﬁnd the best distance between

the

radEAGLE

and the source in question.

The nuclides identiﬁed will be displayed (Fig.

, p.

). The recorded spectrum and the

analysis results are saved. The ﬁle name is composed of the current date and time followed
by an index number.

Current Dose Rate

Current Count Rate

Elapsed Duration

Preset Duration

Radiation Level

Too Close to Source

Optimum Position

Too far away from Source

Figure 24:

The Easy ID screen

Saved Spectrum File

Nuclide Name

Conﬁdence, 1–10

Half Life

Threat Level

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands