ORTEC radEAGLE User Manual Download Page 88

Page: 88 / 147

7.3

Remote Screen

radEAGLE

User Manual

7.3 Remote Screen

This section (Fig.

102

, p.

) shows the current contents of your

radEAGLE

’s screen. The

image changes when you operate the instrument.

You can control the instrument remotely by clicking the key descriptions in the Web inter-
face.

If the

radEAGLE

’s screen is dimmed after a while of inactivity, your ﬁrst click only

restores the screen backlight. So if the instrument does not react after a moment,
click again.

RADEAGLE

18181

Figure 102:

The remote

radEAGLE

’s screen in the Web interface

7.4 Spectrum Browser

This section (Fig.

103

, p.

) provides access to the spectra stored on the

radEAGLE

. You

can inspect, download or delete them.

The spectra are listed with several info columns:

• Record number

• File name derived from the recording date in ISO 8601 format

• Recording date and time in plain language

Initially

all

records are listed by ascending record numbers.

88/147

Software 3.2.12 • Document 3.3.0o

© innoRIID GmbH • 2019-04-11

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands