ORTEC radEAGLE, User Manual

Page: 51 / 147

radEAGLE User Manual radEAGLE Advanced Menu
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Change
Edit the highlighted setting.
5.6 Reachback
This screen (Fig. 46 , p. 51 ) groups settings for a reachback SOP ( 5.25 , p. 76 ). Please refer
to 6.4 , p. 84 for details.
Figure 46: The reachback settings
Settings and Commands
Background
Specify the default duration for a background measurement.
Known Source
Specify the default duration for a measurement of a known source.
Unknown
Specify the default duration for a measurement of an unknown source.
Email Address
Specify the address the reachback data should be sent to. Choose from the list of
addresses saved in your
radEAGLE .
The complete setup for reachback mailings requires entering and editing a lot of
text and thus is available and a lot more convenient in the Web interface (see
7.7 ,
p. 100 ).
Add Email Address
Add an address to the list of addresses saved in your radEAGLE .
© innoRIID GmbH • 2019-04-11 Software 3.2.12 • Document 3.3.0o 51/147