www.orte.pl
www.orte.pl
Page | 25
The pump should automatically turn off several minutes after the burner goes into “PUTTING OUT” mode (or “AFTER
BURNING”, depending on the version of the device).
A drop in the environment temperature below the set
temperature switches on the burner. If the boiler water exceeds 90 °C, the burner is immediately turned
off and goes into “PUTTING OUT” mode (or “AFTER BURNING”, depending on the device version).
7.2. Safe turning off
DANGER!!! Mortal danger. IF YOU WANT TO TURN OFF THE DEVICE – USE THE STOP BUTTON ON
THE CONTROL PANEL. DO NOT UNPLUG IT BECAUSE OF THE RISK OF EXPLOSION.
7.3. Fuel
In Pellet Comfort boilers, burning only high-quality pellet with the diameter from 6 to 8 mm, made of
sawdust of deciduous or coniferous trees, without dust, classified as C1 in accordance with standard 303-
05:2012, as DIN PLUS or A1 in accordance with ISO 17225-2:2014. Do not burn waste, industrial pellet,
pellet of vegetable origin or pits.
Diameter
Ø 6 – 8 mm
Length
< 40 mm
Calorific value
≥ 16,5 MJ/kg
Humidity
≤ 10%
Ash content
≤ 0.7%
7.4. Suggested settings
It is suggested to set the threshold temperature in the range from 55°C to 75°C. Set it with the knob and
confirm by pressing. Information on the temperature controller are contained in a separate manual
(MANUAL – Temperature controller of a solid fuel boiler with fuel feeder). Turn on the device by pressing
START button. Turn off the device by pressing STOP button.
