[Installation
–
Island Models
31
[
INSTALLATION
•
Secure the legs of the unit to the base and make sure that the unit is level
and aligned in the correct position per the design.
•
Install and secure the 2 temporary supporting profiles at the corners of the
island.
•
Place the lower glass retaining trims into position, and leave the bolts
slightly untightened.
Note: At this stage, assistance is required to hold the glass panel(s) in
position.
Slide the inner 2 separating glass panels carefully into the slots between
the bottom and upper trims.
•
Support the glass so that it cannot move from the vertical position.
•
Make sure that there is an upper gasket attached to the top metal panel
where the glass is located.
•
Carefully open the 2 bolts in the center of the supporting profiles and
gently place the metal top panel into position on the glasses.
Summary of Contents for Circle 70
