52
insert TARGET
Eject the original disk and insert the TARGET disk where to copy the file. The display will indicate:
[COPY single]
writing …
According to the size of the file that we need to copy the display will indicate
[COPY single]
copy complete
The data will be transferred by changing the disks over one at a time. If this is a bigger file the display
will indicate:
[COPY single]
insert SOURCE
This means that the original disk must be read again to complete the copy processing. This may happen
a few times for very large files.
In case the function COPY ALL will be selected it will be necessary to change the disks several times.
At the end of the COPY procedure the DISK feature will automatically be switched off.
FORMAT NOTE: When formatting a disk all the information contained will be erased.
To access the FORMAT feature press the DISK button and using the (<) and (>) DATA buttons select
the FORMAT page.
DISK XXXkb free
[DELETE]
To Format the disk press ENTER. The display will indicate:
FORMAT DISK
Are you sure?
To confirm press the ENTER button and the display will indicate:
Track 01 Side 1
!! FORMATTING !!
Press ESCAPE to leave the FORMAT page.