
20
TO RESTORE THE FACTORY SOUNDS
1. Insert Setup Disk into organ
(label side up)
.
2. Press the DISK button (Second row of buttons in the DISK FEATURES Section - located directly
above the Overall Presets Section on the right of the control panel).
Display will show: DIRECTORY
3. Press (>) DATA button to right of the display.
Display will show: SAVE
4. Press (>) DATA button to right of the display.
Display will show: LOAD
5. Press ENTER/YES button (Second row of buttons in the DISK FEATURES Section).
Display will show: Overall Presets
6. Press ENTER/YES button.
Display will show: GT2600.OVP
7. Press ENTER/YES button.
Display will show !!! LOADING !!! revert to ..LOAD...
8. Press ENTER/YES button.
Display will show: Overall Presets
9. Press the right (/\) SCROLL button (1st row DISK FEATURES Section).
Display will show: Automatic Set Up
10. Press ENTER/YES button.
Display will show: GT2600.ASU
11. Press ENTER/YES button.
Display will show !!! LOADING !!! revert to ..LOAD...
12. Switch off the DISK button.