23
USER SOUND BANK
The USER function allows you to double the sounds available in the Upper Flutes*, Upper Orchestra
and Lower Orchestra sections. The factory USER SOUND set can be changed at any time to meet the
musicians needs. The new sounds can be selected as follows:
1. Press the SET button. All the programmable features of the instrument will start flashing.
2. Press, for example, the USER button in the UPPER ORCHESTRA section. Its Led will light up.
3. Press, for example the PIANO sound button.
The Display will show:
UPPER set sust = X
B 0
1 G.Piano2
X
is the Sustain value (the range is from 0 - no sustain - to 7 - max sustain)
B0
is the Sound Bank number where Sound 1 Grand Piano2 is located
The cursor is now positioned below the sound Program Change number. Using the (/\) and (\/) DATA
buttons it is possible to scroll all the sounds available in the instruments from sound bank 1 to sound
bank 24. A selection of 40 Accordion Sounds are available in bank 32.
It is also possible to select the above page by pressing and holding the USER button. The page will be
automatically shown on the display and it will be available for a few seconds to allow quick changes
while playing.
4. Move the cursor using the (<) and (>) DATA buttons and position it under the values that need to
be changed.
5. To select the new sound refer to the SOUND LIST page at the end of this manual or simply take
your time looking for the desired sound while scrolling the sound list on the display.
6. Moving the cursor with (<) and (>) DATA buttons it is possible to select the Bank number and the
Sound number and using the (/\) and (\/) DATA buttons it is possible to change the bank and sound
numbers. To set the Sustain value, position the cursor under the
sust. value
.
7. It is possible to reprogram all the sound section with as many sounds as the section has indicated on
the panel.
*
The USER1,2 and 3 buttons in the Upper Flutes section, allows the player to select and store their
own flute sounds. Additional FLUTE/ORGAN sounds can be stored in the USER button in the Upper
Orchestra section.