
27
DIGITAL ENHANCER
The instrument offers the possibility to have one of the five on-board effects active, at any given time.
The new configuration can be set as follows:
1. Press the SET button. All the programmable features of the instrument will start flashing.
2. Press the ENHANCER button. Its Led will start flashing and the display will show:
DIGITAL Enhancer
Type = 2
With the (/\) and (\/) buttons it is possible to set the Enhancer Type. Change the values while playing
and select the Enhancer type that you prefer.
3. To store the new REVERB setting, press the SET button.
TOUCH SENSITIVITY
The Touch Sense On/Off feature can be set as follows:
1. Press the SET button. All the programmable features of the instrument will start flashing.
2. Press the Touch Sense button. Its Led will start flashing and the display will show:
T.Sens L = On U = On
Curve = 4 Fix = 68
L
indicates all the Lower keyboard sections as indicated in the CONDUCTOR
U
indicates all the Upper keyboard sections as indicated in the CONDUCTOR.
It is possible to have the sections listed in the Lower or in the Upper keyboards to
respond to Touch Sense or not independently of one another.
V
(Value) gives you the volume the instrument will play when used without Touch Sense
(0ff). The minimum volume will be at value 20 and the maximum will be at value 127.
It is possible to change the value by using the (/\) and (\/) Data buttons.
3. To store the new TOUCH SENSE setting, press the SET button.
AUTO START
The AUTO START function can be programmed in two different modes:
Synchro Start: The rhythm starts as soon as the first chord is played and stops only by pressing
START/STOP or ENDING
Key Start:
The rhythm starts as soon as the first chord is pressed and stops automatically when the
keys are released.
They can be easily selected as follows:
1. Press the SET button. All the programmable features of the instrument will start flashing.
2. Press the AUTO/START button. Its Led will start flashing and the display will show:
AUTO_START set
Syncro
To select Key Start configuration use the (/\) and (\/) DATA buttons.
3. To store the new Auto Start setting, press the SET button.