
26
DIGITAL REVERB
It is possible to customize the reverb settings, choosing from the 12 available effects.
The new configuration can be set as follows:
1. Press the SET button. All the programmable features of the instrument will start flashing.
2. Press the Reverb button. Its Led will start flashing and the display will show:
DIGITAL EFFECT
Type = Room 1
With the (/\) and (\/) DATA buttons it is possible to set the DIGITAL EFFECT Type choosing from:
Room 1, Room 2, Room 3, Hall 1, Hall 2, Plate, Delay, Pan Delay, Organ Room, Organ Hall, Organ
Stage and Organ Theatre.
NOTE: The Reverb Organ effects are specially made for Theatre Organ Music.
By pressing the Reverb button again the display will show:
LOWER = ON UPPER = ON
B = - - D = - - A = ON
LOWER
indicates all the parts in the LOWER MANUAL
UPPER
indicates all the parts in the UPPER MANUAL
B
indicates the BASS.
D
indicates the DRUM
A
indicates the AUTOMATIC ACC0MPANIMENT
3. To set the Reverb
On
or
0ff
[two lines (--) indicates that the reverb is 0ff], move the cursor
using the (<)and (>) buttons and position it under the section. Use the (/\) and (\/) DATA
buttons to set the Reverb 0ff.
4. By pressing the Reverb button one more time is possible to change the amount of digital reverb
that each section will have. Press again the selected reverb button and the display will show:
EFFECT LEVEL
LOWER = 100
Moving the cursor with the (<) or (>) buttons you can select the desired section.
The available sections are: LOWER ORCHESTRA, UPPER ORCHESTRA and FLUTES.
With the (/\) and (\/) DATA buttons it is possible to set the Reverb value of the section.
5. To store the new REVERB setting, press the SET button.
To return to the factory set REVERB VALUES it is necessary to reset the instrument.