11
To set up a factory registration for each style on the instrument the Automatic Set Up button has to be
switched on. This is on the control panel to the bottom left hand side of the screen.
The Automatic Set Up will select a complete registration for the entire instrument based on the style
that was selected. Auto Bass and Auto Chord are selected and also an Introduction plus sounds for the
Upper and Lower keyboards. As soon as a chord is played on the lower keyboard an introduction will
be played in the key based on the chord played:
E.g.
C chord key of C.
F chord key of F
Etc.
The Automatic Set Up will remain On until switched Off. Therefore if a style is changed whilst playing
and the Automatic Set Up is on both the sound and tempo are likely to be changed. It is possible to
change the style while playing in the following way:
1. Select the first style required.
2. Switch On the Automatic Set Up.
3. Switch Off the Automatic Set Up.
4. Commence playing.
5. Change the style. The tempo and sounds will now remain the same.
It is also possible to use the Automatic Set Up in conjunction with the Overall Presets:
1. Select the style required.
2. Switch On Automatic Set Up.
3. Switch Off Automatic Set Up.
4. Switch On the Lock button located to the right hand side of the Overall Presets.
5. Commence playing. The registration selected by the Automatic Set Up still remains.
6. Select an Overall Preset from any of the 6 Overall Presets section. The Upper keyboard
registration will change. However the accompaniments and Lower keyboard sounds will remain
the same.
It is therefore possible in this way to combine the Automatic Set Up registrations with those in the
Overall Presets.
The automatic set up is normally registered for people who play with their own chords and with
Autobass.
To play with single finger chords change the MFC button at the bottom of the control panel just above
the lowest note of the upper keyboard to the OFC button.
To play with Bass pedals switch off the Autobass button.
The Automatic Organ and Overall Presets are primarily set up to be played in the traditional manner,
using bass pedals. However they can be used in conjunction with the Automatic Set Up, in which case
bass pedals need not be played.