- 32 -
OPM-4250 | OPM-4250R
- 33 -
Infinitely Expandable
input Select
5.9.
VarietiesofscreenformationsareavailablewithInputselectconfiguration.
y
SelectDVI1orDVI2attheInputSelectmenu.
y
If you select DVI 2 and click Play button at the Input Select menu, the
1
input source will be changed from DVI 1 to DVI 2.
In case you do not select a screen and click Play, the input source for the all screen will be
-
changed.
SelectDVI2attheInputSelectmenu
MSCS instruction
5.7.
Check"ALLPDP"tosenddatatoallconnectedMPDPregardlessofID.
y
OnE PDP
y
:TransmitProtocolCommandtooneMPDP.
ALL PDP
y
:TransmittheProtocolcommandsequentiallytoallconnectedMPDPsets.
Broadcast
y
:TransmittheProtocolcommandsimultaneouslytoallconnectedMPDPsets.
InordertocontrolpowerofspecificMPDP,use"PowerOn/Off"buttonafterselectingthe
y
specificMPDP.
MPDPControl-PowerOn/Off
iD Setting
5.8.
IDofMSCS(MultiScreenControlSystem)issetautomatically.
y
TosendacommandtothedesiredMPDPset,selectIDoftheMPDPfromScreenConfiguration.
y
SelectIDusingrightbuttonofthemouse.SelectedIDisdisplayedwithredsquarebox.
y
ExampleofMPDPIDSetting
(Input signal is DVI, Configuration is 3 by 3)
※
Input source is not displayed on the MSCS screen, but it is indicated by colors.
(
DVI 1: Yellow, DVI 2: Green)
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Please wait for at least 10 seconds before executing "Power On" command after
the first AC power connection. If not, it may cause abnormal behavior.
Please disconnect AC power and reconnect in case of abnormal behavior.
Caution
Summary of Contents for OPM-4250
Page 45: ...86 OPM 4250 OPM 4250R Memo...
