Orion FLEX HPA, Manual

Page: 57 / 166

Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 System Operation
Page 3-23
Reinforce Wrap Setup
This is the Reinforce Wraps Setting Screen. This screen allows the user to set the number
of reinforce wraps that are applied when the reinforce button on the Run Screen is pressed.
Figure 3 - 16
The Reinforce Setup
Screen
Table 3-15. The Reinforce Wraps Screen Button Descriptions
STATE 1 DESCRIPTION
REINFORCE WRAPS
Press this button to set the number of reinforce wraps that are applied when the
enable reinforce wraps button is pressed on the Run screen.