Orion Combo 200, User Manual

Page: 35 / 52

35
Chapter 7: Maintenance
ATTENTION
Do not ever open the laser case and panels. Even if the machine is switched off,
there are some internal parts that may still be subject to live voltage, and there-
fore there may be the possibility of electric shock.
ATTENTION
Any required maintenance on the laser’s optic rail and trajectory path, must be
performed EXCLUSIVELY by Sunstone / Orion Welders or an agent authorized by
Sunstone / Orion Welders.
In order to keep the machine in a safe and optimal working condition, ensure that the following safety
measures are followed:
• Change the leather protection strips that cover the entrance to the weld chamber if there are ever
any signs of wear or damage.
• If the green-tinted viewing glass for viewing inside the weld chamber should ever break, this must
be replaced only with approved spare parts. Regular glass or plastic cannot be used as these do
not provide safety from the laser emission.
• Do not ever remove the filter inserted in the microscope lens.
• Do not ever insert large mirror-like surfaces (mirrors, aluminum sheets, chrome plated items)
into the weld chamber. These mirror-like surfaces could cause dangerous reflections of the laser
beam inside the weld chamber.
The following maintenance items can be performed by the user since they do
not create any risk of personal injury.
7.1: CLEAN OR REPLACE THE PROTECTION LENS
Over time, the protective glass lens may become dirty, and can cause a reduction in amount of weld
energy that gets delivered. If the lens does become dirty or contaminated with metal slag, it will need
to be cleaned and/or possibly replaced.