8
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg8
Features
2.2 Selecting the Appropriate Mounting Hardware
1.
Insert the Thread Depth Indicator into the thread inserts found on the back of
the flat panel
2.
Use a pencil to mark the depth of the thread insert on the Thread Depth
Indicator, as shown in Figure 1.
3.
Insert the Thread Depth Indicator into the remaining thread inserts to compare
and verify their depth.
4.
Locate the correct diameter screw for the thread insert.
5.
Test each size of the screws provided.
If the screw you selected is longer than the mark on the Thread Depth Indicator, as
shown in Figure 2 and Figure 3, do not use this screw. The screw length must not
bypass the mark.
Select another screw length until you fi nd a screw that comes closest to the mark
without going past the mark.
The correct screws should thread easily into the mount point and not pull out when
tension is applied.
Proceed to the
“Griplate™ Washer Installation”
Section
Inverted Flat Panel
Screw Screw
Figure 1
Figure 2
Figure 3
Thread Depth
Indicator
Depth Mark
Depth Mark
Thread Depth
Indicator
Marking the
Depth
Threaded
Insert
Threaded Depth
Indicator
