11
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg11
Attaching Decorative Covers
Step1
When attaching the decorative covers, verify the direction
of the covers. The smaller mounting hole should be in
position above the larger mounting hole.
1. Place the first decorative cover over the first
mounting bracket arm and push firmly into
place.
2. Repeat Step 1 for the second decorative
cover and mounting bracket arm.
Step2
1. Align the mounting holes.
2.
Insert and tighten a M4 x 6mm Phillips
screw (smaller mounting hole).
3.
Insert and tighten a M6 x 25mm Phillips
screw (larger mounting hole).
4.
Repeat Step 2 and 3 for the second
decorative cover and mounting bracket
arm.
Cable Management
Route cables through the cable access
holes and to their respective locations.
The cables must then be routed through
the coupler, up the ceiling adapter (not
included) and into the ceiling to a pre-
determined source.
* Do not over-tighten these screws.
Mounting
Bracket
Arms
Decorative
Cover
M4 x 6mm Screw
Screwdriver
M6 x 25mm Screw
To Ceiling
Ceiling Adapter
Coupler
Source or A/V
Cable
