10
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg10
Flat Panel Installation
Step1
Step2
Install the mount according to the instructions
provided by Premier Mounts. Perform all structural
reinforcements before attaching the flat panel to the
ceiling mount.
Do not release the flat panel until the mounting
bracket arms are fully resting on the elliptical
mounting bar.
Raise the mounting bracket arms and the
attached flat panel over the elliptical mounting
bar of the CMH-01
The cable access ports face the rear of the flat
panel. It may be easier to pre-wire any cables
prior to flat panel installation (see Page 10).
Mounting Bracket Arms
Elliptical Mounting Bar
Lower and center the mounting bracket arms with the
attached fl at panel onto the elliptical mounting bar of the
CMH-01.
z
Do not release the fl at panel until the mounting bracket
arms are resting fully on the elliptical mounting bar.
Proceed to
“Attaching the Decorative Covers”
section.
