12
Installation and User’s Guide
http://www.orionimages.com
7300 Bolsa Avenue, Westminster CA 92683 / Tel: 714-766-6300 / Fax: 714-766-6310
pg12
Tilt Positioning
Adjusting the Flat Panel Friction
Tilt Angle
1. Place one hand at the center top edge of the
flat panel.
2. Place the other hand on the center bottom
edge of the fl at panel.
3. Using the upper hand, gently pull the top of
the fl at panel towards you while the lower
hand gently pushes the bottom of the fl at
panel away from you.
Adjusting the Flat Panel to the
Original Position
1. Place one hand at the center top edge of the
flat panel.
2. Place the other hand on the center bottom
edge of the fl at panel.
3. Using the upper hand, gently push the top of
the fl at panel towards the wall while the
lower hand gently pulls the bottom of the flat
panel away from the wall.
* If additional tilt friction is required, tighten the lower
nut and lower bolt only, to increase the tilt friction.
Lower Bolt
Lower Nut
Optional Mounting Configuration and Accessories
The CMH-01is designed for use with either a standard piece of 1-½
˝
pipe or any the following ceiling mount
adapters from ORION Images. Please refer to the ceiling mount adapter installation instructions when
mounting. Please contact ORION Images at (714) 766-6300 with any questions.
Enseo HD2000 Adapter
Media Player Adapter
MAC Mini Adapter
Please refer to the installation instructions that come
packaged with these products for correct installation
procedures.
1-1/2 Adjustable
Height Adapter
