PT-Link II N2-3 Interface
PT-Link II N2-3
®
Technical Guide
11
FS-GUI File Transfers and Data Arrays
NOTE:
The following fi les can also be udpated in
File Transfer Window
:
Firmware Files:
The FieldServer Firmware contains the application
program commonly referred to as the DCC or the PCC. This program
contains the protocol drivers applicable to the application and the Field-
Server Operating System Kernel. A Firmware update is only required
when updated fi les are received from FieldServer support. Firmware
fi les have a *.bin extension. The procedure for updating these is the
same as for the confi guration fi les, but the update needs to be made in
the
Firmware Tab
.
General (Other) Files:
Other fi les that can be updated include the FS-
GUI image and other fi les described in driver manuals. The procedure for
updating these is the same as for the confi guration fi les, but the update
needs to be made in the
General Tab
.
Figure 14: Navigation Window - View Data Arrays
Verifying Communications
1. ) In the
Navigation Window
on the left of the
FS-GUI Main Screen
,
click
<View>
and then
click
<Data Arrays>
. See
Figure 14
.
2. )
Click
on the Controller name. In this case, it is DA_C160_I0, a
VCM-X Controller. The Controller’s Data Array Table will display.
See
Figure 15
.
Figure 15: VCM-X Data Array Table
3 ) You can now cross reference the values shown in
Figure 15
with
the listed parameter names in the appropriate Data Array Table for your
controller type. These tables can be found on
pages 19-21
.
