ORiNG TGPS-9084GT-M12 User Manual Download Page 84

Page: 84 / 180

TGPS-9084GT-M12 Series User

Manual

ORing Industrial Networking Corp

PCP value: 0 1 2 3 4 5 6 7

QoS class: 1 0 2 3 4 5 6 7

If the port is VLAN aware, the frame is tagged, and Tag Class is

enabled, then the frame is classified to a QoS class that is

mapped from the PCP and DEI value in the tag. Otherwise the

frame is classified to the default QoS class.

The classified QoS class can be overruled by a QCL entry.

Note: if the default QoS class has been dynamically changed,

then the actual default QoS class is shown in parentheses after

the configured default QoS class.

DP level

Controls the default Drop Precedence Level

All frames are classified to a DP level.

If the port is VLAN aware and the frame is tagged, then the frame

is classified to a DP level that is equal to the DEI value in the tag.

Otherwise the frame is classified to the default DP level.

If the port is VLAN aware, the frame is tagged, and Tag Class is

enabled, then the frame is classified to a DP level that is mapped

from the PCP and DEI value in the tag. Otherwise the frame is

classified to the default DP level.

The classified DP level can be overruled by a QCL entry.

PCP

Controls the default PCP value

All frames are classified to a PCP value.

If the port is VLAN aware and the frame is tagged, then the frame

is classified to the PCP value in the tag. Otherwise the frame is

classified to the default PCP value.

DEI

Controls the default DEI value

All frames are classified to a DEI value.

If the port is VLAN aware and the frame is tagged, then the frame

is classified to the DEI value in the tag. Otherwise the frame is

classified to the default DEI value.

Tag Class

Shows the classification mode for tagged frames on this port

Disabled

: Use default QoS class and DP level for tagged frames

Enabled

: Use mapped versions of PCP and DEI for tagged

frames

Click on the mode to configure the mode and/or mapping

Note: this setting has no effect if the port is VLAN unaware.

Tagged frames received on VLAN-unaware ports are always

Summary of Contents for TGPS-9084GT-M12





















































































































































































Search results

Summary of Contents for TGPS-9084GT-M12

Reviews:

Related manuals for TGPS-9084GT-M12

Brands by name

Popular brands

ORiNG TGPS-9084GT-M12, User Manual

Search results

Summary of Contents for TGPS-9084GT-M12

Reviews:

Related manuals for TGPS-9084GT-M12

Brands by name

Popular brands