TGPS-9084GT-M12 Series User
Manual
ORing Industrial Networking Corp
110
Any
: the ACE applies to any port
Port n
: the ACE applies to this port number, where n is the number of
the switch port.
Policy n
: the ACE applies to this policy number, where n can range
from 1 to 8.
Frame Type
Indicates the frame type of the ACE. These frame types are mutually
exclusive.
Any
: any frame can match the ACE.
Ethernet Type
: only Ethernet type frames can match the ACE. The
IEEE 802.3 descripts the value of length/types should be greater
than or equal to 1536 decimal (equal to 0600 hexadecimal).
ARP
: only ARP frames can match the ACE. Notice the ARP frames
will not match the ACE with Ethernet type.
IPv4
: only IPv4 frames can match the ACE. Notice the IPv4 frames
will not match the ACE with Ethernet type.
Action
Specifies the action to take when a frame matches the ACE.
Permit: takes action when the frame matches the ACE.
Deny: drops the frame matching the ACE.
Rate Limiter
Specifies the rate limiter in number of base units. The allowed range
is 1 to 15.
Disabled
means the rate limiter operation is disabled.
Port Copy
Frames matching the ACE are copied to the port number specified
here. The allowed range is the same as the switch port number
range. Disabled means the port copy operation is disabled.
Logging
Specifies the logging operation of the ACE. The allowed values are:
Enabled
: frames matching the ACE are stored in the system log.
Disabled
: frames matching the ACE are not logged.
Please note that system log memory capacity and logging rate is
limited.
Shutdown
Specifies the shutdown operation of the ACE. The allowed values
are:
Enabled
: if a frame matches the ACE, the ingress port will be
disabled.
Disabled
: port shutdown is disabled for the ACE.
Counter
Indicates the number of times the ACE matched by a frame.
