ORiNG TGPS-9084GT-M12 User Manual Download Page 54

Page: 54 / 180

TGPS-9084GT-M12 Series User

Manual

ORing Industrial Networking Corp

a DHCP client. It only works when DHCP relay mode is enabled.

Disabled

: disable DHCP relay information

Relay Information

Policy

Indicates the policies to be enforced when receiving DHCP relay

information. When DHCP relay information mode is enabled, if the

agent receives a DHCP message that already contains relay agent

information, it will enforce the policy. The Replace option is invalid

when relay information mode is disabled. The policies includes:

Replace

: replace the original relay information when a DHCP

message containing the information is received.

Keep

: keep the original relay information when a DHCP message

containing the information is received.

Drop

: drop the package when a DHCP message containing the

information is received.

The relay statistics shows the information of relayed packets of the switch.

Label

Description

Transmit to Sever

The number of packets relayed from the client to the server

Transmit Error

The number of packets with errors when being sent to clients

Receive from Server

The number of packets received from the server

Receive Missing Agent

Option

The number of packets received without agent information

Receive Missing Circuit

The number of packets received with Circuit ID

Receive Missing

Remote ID

The number of packets received with the Remote ID option

missing.

Receive Bad Circuit ID

The number of packets whose Circuit ID do not match the

known circuit ID

Receive Bad Remote ID

The number of packets whose Remote ID do not match the

known Remote ID

Summary of Contents for TGPS-9084GT-M12





















































































































































































Search results

Summary of Contents for TGPS-9084GT-M12

Reviews:

Related manuals for TGPS-9084GT-M12

Brands by name

Popular brands

ORiNG TGPS-9084GT-M12, User Manual

Search results

Summary of Contents for TGPS-9084GT-M12

Reviews:

Related manuals for TGPS-9084GT-M12

Brands by name

Popular brands