TGPS-9084GT-M12 Series User
Manual
ORing Industrial Networking Corp
115
ARP
: frame must have ARP/RARP opcode set to ARP
RARP
: frame must have ARP/RARP opcode set to RARP.
Other
: frame has unknown ARP/RARP Opcode flag.
Request/Reply
Specifies the available ARP/RARP opcode (OP) flag for the ACE
Any
: no ARP/RARP OP flag is specified (OP is "
don't-care
").
Request
: frame must have ARP Request or RARP Request OP flag
set.
Reply
: frame must have ARP Reply or RARP Reply OP flag.
Sender IP Filter
Specifies the sender IP filter for the ACE
Any
: no sender IP filter is specified (sender IP filter is "
don't-care
").
Host
: sender IP filter is set to
Host
. Specify the sender IP address in
the
SIP Address
field that appears.
Network
: sender IP filter is set to
Network
. Specify the sender IP
address and sender IP mask in the
SIP Address
and
SIP Mask
fields that appear.
Sender IP Address
When Host or Network is selected for the sender IP filter, you can
enter a specific sender IP address in dotted decimal notation.
Sender IP Mask
When Network is selected for the sender IP filter, you can enter a
specific sender IP mask in dotted decimal notation.
Target IP Filter
Specifies the target IP filter for the specific ACE
Any
: no target IP filter is specified (target IP filter is "
don't-care
").
Host
: target IP filter is set to
Host
. Specify the target IP address in
the
Target IP Address
field that appears.
Network
: target IP filter is set to
Network
. Specify the target IP
address and target IP mask in the
Target IP Address
and
Target IP
Mask
fields that appear.
Target IP Address
When
Host
or
Network
is selected for the target IP filter, you can
enter a specific target IP address in dotted decimal notation.
Target IP Mask
When
Network
is selected for the target IP filter, you can enter a
specific target IP mask in dotted decimal notation.
ARP SMAC Match
Specifies whether frames will meet the action according to their
sender hardware address field (SHA) settings.
0
: ARP frames where SHA is not equal to the SMAC address
1
: ARP frames where SHA is equal to the SMAC address
Any
: any value is allowed ("
don't-care
").
RARP SMAC
Match
Specifies whether frames will meet the action according to their
target hardware address field (THA) settings.
