ORiNG RGPS-7244GP User Manual Download Page 85

Page: 85 / 109

RGPS-7244GP / RGPS-7244GP-P User’s Manual

ORing Industrial Networking Corp

4.1.11.6 Detailed Statistics

This page provides detailed traffic statistics for a specific switch port. Use the port select box to

select which switch port details to display.

The displayed counters are the totals for receive and transmit, the size counters for receive

and transmit, and the error counters for receive and transmit.

Detailed Statistics-Receive & Transmit Total

Label

Description

Rx and Tx Packets

The number of received and transmitted (good and bad) packets.

Rx and Tx Octets

The number of received and transmitted (good and bad) bytes.

Includes FCS, but excludes framing bits.

Rx and Tx Unicast

The number of received and transmitted (good and bad) unicast

packets.

Rx and Tx

Multicast

The number of received and transmitted (good and bad) multicast

packets.

Rx and Tx

Broadcast

The number of received and transmitted (good and bad) broadcast

packets.

Rx and Tx Pause

A count of the MAC Control frames received or transmitted on this

port that have an opcode indicating a PAUSE operation.

Rx Drops

The number of frames dropped due to lack of receive buffers or

egress congestion.

The number of frames received with CRC or alignment errors.

Summary of Contents for RGPS-7244GP














































































































Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands

ORiNG RGPS-7244GP, User Manual

Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands