ORiNG RGPS-7244GP User Manual Download Page 84

Page: 84 / 109

RGPS-7244GP / RGPS-7244GP-P User’s Manual

ORing Industrial Networking Corp

4.1.11.5 Traffic Overview

This page provides an overview of general traffic statistics for all switch ports.

Label

Description

Port

The logical port for the settings contained in the same row.

Packets

The number of received and transmitted packets per port.

Bytes

The number of received and transmitted bytes per port.

Errors

The number of frames received in error and the number of

incomplete transmissions per port.

Drops

The number of frames discarded due to ingress or egress

congestion.

Filtered

The number of received frames filtered by the forwarding process.

Check this box to enable an automatic refresh of the page at regular

intervals.

Updates the counters entries, starting from the current entry ID.

Flushes all counters entries.

Summary of Contents for RGPS-7244GP














































































































Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands

ORiNG RGPS-7244GP, User Manual

Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands