ORiNG RGPS-7244GP User Manual Download Page 34

Page: 34 / 109

RGPS-7244GP / RGPS-7244GP-P User’s Manual

ORing Industrial Networking Corp

Click to save changes.

Click to undo any changes made locally and revert to previously

saved values.

4.1.4.3.3

LACP System Status

This page provides a status overview for all LACP instances.

Label

Description

Aggr ID

The Aggregation ID associated with this aggregation instance. For

LLAG the id is shown as 'isid:aggr-id' and for GLAGs as 'aggr-id'

Partner System ID

The system ID (MAC address) of the aggregation partner.

Partner Key

The Key that the partner has assigned to this aggregation ID.

Last Changed

The time since this aggregation changed.

Last Channged

Shows which ports are a part of this aggregation for this

switch/stack. The format is: "Switch ID:Port".

Click to refresh the page immediately.

Check this box to enable an automatic refresh of the page at

regular intervals.

Summary of Contents for RGPS-7244GP














































































































Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands

ORiNG RGPS-7244GP, User Manual

Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands