ORiNG RGPS-7244GP User Manual Download Page 74

Page: 74 / 109

RGPS-7244GP / RGPS-7244GP-P User’s Manual

ORing Industrial Networking Corp

IGMP querier.

If an aggregation member port is selected as a router port, the whole

aggregation will act as a router port.

Fast Leave

Enable the fast leave on the port.

4.1.9.2 IGMP Snooping Status

Label

Description

VLAN ID

The VLAN ID of the entry.

Groups

The present IGMP groups. Max. are 128 groups for each VLAN.

Port Members

The ports that are members of the entry.

Querier Status

Show the Querier status is "ACTIVE" or "IDLE".

Querier Receive

The number of Transmitted Querier.

V1 Reports

Receive

The number of Received V1 Reports.

V2 Reports

Receive

The number of Received V2 Reports.

V3 Reports

Receive

The number of Received V3 Reports.

V2 Leave Receive

The number of Received V2 Leave.

Click to refresh the page immediately.

Clears all Statistics counters.

Summary of Contents for RGPS-7244GP














































































































Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands

ORiNG RGPS-7244GP, User Manual

Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands