RGPS-7244GP / RGPS-7244GP-P User’s Manual
ORing Industrial Networking Corp
11
C
ables
3.1 Ethernet Cables
The RGPS-7244GP(-P) switch has standard Ethernet ports. According to the link type, the
switch use CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs, servers,
switches, routers, or hubs). Please refer to the following table for cable specifications.
Cable Types and Specifications
Cable
Type
Max. Length
Connector
10BASE-T
Cat. 3, 4, 5 100-ohm
UTP 100 m (328 ft)
RJ-45
100BASE-TX
Cat. 5 100-ohm UTP
UTP 100 m (328 ft)
RJ-45
1000BASE-TX
Cat. 5/Cat. 5e 100-ohm
UTP
UTP 100 m (328ft)
RJ-45
3.1.1 100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
10/100 P.S.E. Base-TX RJ-45 Pin Assignments
Pin Number
Assignment
1
TD+ with PoE Power input +
2
TD- with PoE Power input +
3
RD+ with PoE Power input -
4 Not
used
5 Not
used
6
RD- with PoE Power input -
7 Not
used
8 Not
used
1000 Base-T RJ-45 Pin Assignments
