ORiNG RGPS-7244GP User Manual Download Page 79

Page: 79 / 109

RGPS-7244GP / RGPS-7244GP-P User’s Manual

ORing Industrial Networking Corp

Port

The UDP port to use on the RADIUS Authentication Server. If the

port is set to 0 (zero), the default port (1812) is used on the

RADIUS Authentication Server.

Secret

The secret - up to 29 characters long - shared between the

RADIUS Accounting Server and the switchstack.

4.1.11 Monitor and Diag
4.1.11.1 MAC Table

The MAC Address Table is configured on this page. Set timeouts for entries in the dynamic

MAC Table and configure the static MAC table here.

Aging Configuration

By default, dynamic entries are removed from the MAC after 300 seconds. This removal is also

called aging.

Configure aging time by entering a value here in seconds; for example,

Age

time

seconds.

The allowed range is 10 to 1000000 seconds.

Disable the automatic aging of dynamic entries by checking

Disable automatic aging

Summary of Contents for RGPS-7244GP














































































































Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands

ORiNG RGPS-7244GP, User Manual

Search results

Summary of Contents for RGPS-7244GP

Reviews:

Related manuals for RGPS-7244GP

Brands by name

Popular brands