Preparation
−6−
3.6 Basic operations of the
OPX-2A
Use the six keys
to set data and operate the motor.
Operation flow
The
OPX-2A
is operated according to the flow shown below.
Level 2: Item selection screen
Level 3
Level 1: Top screen in each mode
1
2
3
4
Use the
key to navigate
through the
modes.
Use the
key to move
to the lower level.
to
Use
move to the
previous item.
to
Use
move to the
next item.
Use the
key to move
to the upper level.
1. Use the
key to select a desired operation mode appropriate for your intended operation.
Example: If you want to use a function in the test mode, press the
key to select the test mode (indicated by
a lit "TEST" LED).
The top screen of the test mode is displayed.
2. Press the
key to move to the lower level.
3. Use the
keys to select a desired item.
4. To move to the lower level, press the
key. To return to the previous level, press the
key.
As explained above, use the
key to navigate through the levels and use the
keys to select a desired
item. This is the basic operation flow.
Note
If the
key is pressed while the driver performs the internal processing, the screen cannot
change to any lower level from the top screen, and "mEm-bUSY" is displayed.
Be sure to wait until all internal processing is completed, before pressing the
key.
