manualshive.com logo in svg

Orientalmotor BXII Series, Operating Manual

Share
Download
Orientalmotor BXII Series Operating Manual Download Page 35

When using the product with the position control mode 

−35−

•

•

Warning

When a warning generates, a corresponding warning code will be displayed.

Warning records can be checked or cleared.

 

Warning record 1 (latest)

Warning record 10 

(oldest)

Clear warning records

Warning records 

are being cleared 

(blinking)

Warning record 2

Warning

*•

If operations are limited by the edit lock function, the screens in gray color are not displayed.

Note

 

•

Do not turn off the driver power while warning records are being cleared (=while the display is 

blinking). Doing so may damage the data.

 

•

When operations are limited by the edit lock function, the warning records cannot be cleared.

 

•

Warning records will automatically be cleared by turning off the driver power.

Warning code list

Code

Warning name

10

Excessive position deviation

22

Overvoltage

30

Overload

6C Operation prohibited

Summary of Contents for BXII Series





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands