23
▌
Installing the non-guide type
4. Using the centering shaft to resemble the actuator, insert the centering shaft to the
mounting plate.
Loosen the screws securing the centering adjustment plate, and temporarily fix the
screws so as to move slightly when touching the centering adjustment plate.
Centering adjustment plate
Mounting plate
Fix screws temporarily
Centering shaft
5. Slide the movable plate to check that it moves smoothly, and tighten the screws on the
centering adjustment plate.
If the movable plate does not move smoothly, adjust axis misalignment between
the centering shaft and the centering adjustment plate while moving the centering
adjustment plate from right to left or up and down.
Model
Screw size
Tightening torque *
DRSM42
M3
0.6 N·m (85 oz-in)
DRSM60
M5
3 N·m (420 oz-in)
* The tightening torques shown in the table are reference values. Tighten the suitable force
according to the material and thickness of the centering adjustment plate.
6. Remove the centering shaft.
