Installing the non-guide type
▌
22
z
If the accuracy of component parts is not enough to perform centering
1. Secure the centering adjustment plate to the movable plate using screws.
Centering adjustment plate
Movable plate
2. Secure the movable plate to the guide block using screws.
Guide block
3. Move the movable plate closer to the mounting plate, and check that there is no gap
between the plates.
When there is a distance between the movable plate and the mounting plate, put a block
gauge, and check that there is no gap between the plates.
If there is a gap, reinstall the movable plate.
No gap
No gap
No gap
Block gauge
