5
▌
Safety precautions
•
Provide an emergency stop device or emergency stop circuit externally so
that the entire equipment will operate safely in the event of a system failure
or malfunction. Failure to do so may result in injury.
•
When the driver was replaced, set parameters such as the resolution, moving
direction and others before operating the actuator. Operating the actuator
without setting parameters may cause the ball screw to move to unexpected
directions or run at unexpected speeds, leading to injury or damage to
equipment.
•
Do not use the product beyond the specifications. Doing so may result in
electric shock, injury or damage to equipment.
•
Keep your fingers and objects out of the openings in the product. Doing so
may result in fire, electrical shock, or injury.
•
Do not touch the product while operating or immediately after stopping.
Doing so may result in skin burn(s).
•
Do not hold the moving part or cable. Doing so may result in injury.
•
Keep the area around the product free of combustible materials. Doing so
may result in fire or skin burn(s).
•
Do not leave anything around the product that would obstruct ventilation.
Doing so may result in damage to equipment.
•
Do not touch the moving part during operation. Doing so may result in
injury.
•
Do not touch the terminals while conducting the insulation resistance
measurement or dielectric strength test. This may cause electric shock.
•
While operating the actuator, do not make the cable contact with the
moving part. Disconnection of the cable may result in electric shock or
damage to equipment.
•
Use an actuator and driver only in the specified combination. An incorrect
combination may cause a fire.
•
Dispose the product correctly in accordance with laws and regulations, or
instructions of local governments.
•
Wear a helmet, safety shoes, gloves or other protective gears when
transporting or installing the product. Failure to do so may result in injury.
•
Since the motor surface temperature may exceed 70 °C
(158 °F) even under normal operating conditions, affix
the warning label as shown in the figure in a conspicuous
position. Failure to do so may result in skin burn(s).
Warning label
