Installing the non-guide type
▌
20
Installation procedure
The installation procedure varies based on the accuracy of component parts of equipment.
•
If the accuracy of component parts enables centering without adjustment: Centering does
not required.
•
If the accuracy of component parts is not enough to perform centering: Perform centering
using jigs.
Step1
Installing the positioning pin
Install positioning pins (each 2 pcs.), which are used to set the position of the guide rail and
mounting plate, on the base plate.
Intersect at
a right angle
Base plate
Positioning
pins
Positioning pin for
mounting plate
Positioning pin
for guide rail
Intersect at a
right angle
Step2
Installing the guide rail
Secure a guide rail to the base plate using screws while pressing the reference surface of the
guide rail to the positioning pin.
Check the manufacturer of a guide rail for the position of the reference surface of the guide
rail.
Positioning pin
for guide rail
Reference surface
of the guide rail
Positioning pin
for guide rail
Press
