Installation
17
▐
When installing from below the mounting plate
Use the positioning pin holes as mounting holes.
Fit the pilot of the actuator into the pilot-receiving hole having performed through-hole machining, and secure the
mounting holes with screws (four pieces). Provide screw hole machining in the mounting plate since the positioning
pin holes and the mounting holes are through holes.
Screw hole machining
in a mounting plate
Screws (M4)
Spring washers
Positioning pin holes (2 places)
Use as mounting holes.
Mounting holes
(2 places)
Pilot receiving hole
Pilot
When a mounting plate with through-hole is used
z
Design for mounting plate [reference] [unit
：
mm (in.)]
50 (1.97)
2×M4
70.71±0.03
(2.7839±0.0012)
33 (1.3)
ø45
(ø1.77)
46 (1.81)
30 (1.18)
50 (1.97)
[R16.5
(0.65)]
ø5 (
) × deep 3
+0.012
0
) × deep 0.12]
[ø0.1969 (
+0.0005
0
5 (
) × deep 3
+0.012
0
) × deep 0.12]
[0.1969 (
+0.0005
0
A
Details of section A (2:1)
6 (0.24)
z
Installation method
1. Pass the motor/encoder lead wires through the through hole of the mounting plate.
Positioning pins
Screw hole machining
in a mounting plate
Through hole
Motor/encoder lead wires
