Safety precautions
▌
10
•
Do not use the product beyond its specifications.
Doing so may cause electric shock, injury or damage to equipment.
•
Keep your fingers and objects out of the openings in the product.
Failure to do so may result in fire, electric shock or injury.
•
Do not touch the product while operating or immediately after stopping.
Doing so may cause a skin burn(s).
•
Do not carry the actuator by holding its cables or its moving part.
Doing so may cause injury.
•
Keep the area around the product free of combustible materials.
Failure to do so may result in fire or a skin burn(s).
•
Leave nothing around the product that would obstruct ventilation.
Failure to do so may result in damage to equipment.
•
Do not touch the moving part during operation.
Doing so may cause injury.
•
Do not touch the terminals while conducting the insulation resistance measurement or dielectric
strength test.
Doing so may cause electric shock.
•
Do not use the home-sensor set (accessory) as safety components.
Doing so may result in injury or equipment damage.
•
Use an actuator and driver only in the specified combination.
An incorrect combination may cause a fire.
•
The motor surface temperature may exceed 70 °C (158 °F) even under normal
operating conditions. If the operator is allowed to approach the running motor,
attach a warning label as shown below in a conspicuous position.
Failure to do so may result in a skin burn(s).
Warning label
•
The actuator is very heavy. When transporting or installing the actuator, make sure two persons work
together to carry out the necessary tasks.
Failure to do so may result in injury.
•
Wear a helmet, safety shoes, gloves or other protective gear when transporting or installing the
actuator.
Failure to do so may result in injury.
