Oricom S6000 Series Manual Download Page 6

Page: 6 / 42

LCD Display on the Handset

6 of 42

Icon

Name

Description

Battery

•

Animated when charging.

•

When the battery indicator displays 4 blocks, the

battery is fully charged.

•

When the battery indicator displays no block, the

battery is almost empty, and requires charging.

Signal Indicator

Steadily – signal linkage between handset and base is
established.
Blinking – no signal linkage with any base.

Off Hook

Display during off hook.

Calling External

User is calling outside.

Calling Internal

User is making an intercom call

Conference

User is talking with one external and another internal
user.

External Call

Blinking – there is a call from outside.
Steady – Line is engaged.

Intercom

Blinking – there is an intercom call.

– when being paged.

Steady – Line is engaged.

New CID

New CID received.

Left Scroll

The number displayed contains more than 16 digits and
the rightmost 16 digits are displayed.

Mute

Handset microphone is muted during off hook.

Ringer Off

The handset ringer is turned off.

Message Waiting

Message waiting indication (VMWI) has been received.

Basic steps to install

1. Connect the plug of the mains adaptor

to the socket on the

back of the base unit and the mains adaptor to the wall mains
supply.

2. Plugs the mains adaptor of the additional handset charger to the

wall mains supply.

3. Insert 2 rechargeable batteries (included) in each handset

observing the polarity, into the battery compartment of each
handset.

4. Slide the battery door into place on each Handset.
5. Place the handsets on the chargers and let the batteries charge for

a full 14 hours before using for the first time.

6. Connect one end of the telephone lead to the socket on bottom of

base unit and the other to the phone socket on the wall.

7. Check handsets for dial tone by pressing

8. Handset may get warm during initial charge. This is normal.

CAUTION

Use only the mains adapter supplied with this telephone.

Incorrect adapter polarity or voltage can seriously damage the
unit.

Adaptor for Base
Input: 230 VAC 50 Hz
Output: 9 VDC 300 mA

Adaptor for Charger
Input: 230 VAC 50 Hz
Output: 9 VDC 150 mA

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. Never use non-rechargeable batteries; use
recommended type supplied with this telephone. Ni-MH batteries
must be disposed of in accordance with applicable waste disposal
regulations.

Left Scroll

Battery

Phone On

External /
Internal /
Conference

Message
Waiting

Ringer Off

Mute

Signal Indicator

New CID

Digits & Text
Display

7-segment Clock

Summary of Contents for S6000 Series











































Search results

Summary of Contents for S6000 Series

Reviews:

Related manuals for S6000 Series

Brands by name

Popular brands

Oricom S6000 Series, Manual

Search results

Summary of Contents for S6000 Series

Reviews:

Related manuals for S6000 Series

Brands by name

Popular brands