Oricom S6000 Series Manual Download Page 40 | Manualshive

Page: 40 / 42

background image

Appendix: Default Settings

External ringer melody (handset and base): MELODY 1
Internal ringer melody (handset): MELODY 2
Handset Ring Volume:

Base Ring Volume:

Receiver Volume: Med
Flash Timing: FLASH 1
Dial Mode: Tone
Auto Answer: On
Key Beep Tone: On
Confirmation Tone: On
Charging Tone: On
Backlit (if applicable): On
Call Timer: On
Message Waiting Indicator: Off
Monitor: Off
Direct Dial function: Off
Direct Dial number: Empty
Prefix Dialling: Off
Prefixes and numbers: Empty
Call Barring: Off
Call bar and exempt numbers: Empty
Operator services: Default services
Base Selection: Auto
PIN Code: 0000 (for base menu)
SMS Service: ON
Service centre numbers: Pre-programmed #
Active service centre: Service centre 1
Sub-Address: 0
SMS Alert Tone: On
Handset Name: ORICOM
Language: English

Troubleshooting

The phone does not work at all

•

Make sure that adapter and phone cord are connected properly.

•

Check that the batteries are fully charged and installed properly.

•

Check that the handset is correctly registered to the same base

unit.

•

Move the handset closer to the base unit.

The phone does not ring

•

Make sure the adapter and the phone cord are connected properly.

•

Move the handset closer to the base unit.

•

Check that the handset is correctly registered to the same base

unit.

•

Make sure the handset (or base) ringer is turned on.

The phone does not dial out

•

Check that the phone cord is connected properly.

•

Check the handset is fully charged.

•

Check that the handset is correctly registered to the same base

unit.

•

The dialled number may be barred. See Call Barring section

•

The keypad may be locked. See Handset Keypad Lock/Unlock

section.

CID does not work properly

•

Check with your local phone company that the CID service is

subscribed to.

•

Let the phone ring at least once before answering.

The CIDCW call cannot be answered

•

Check with your local phone company and select the correct recall

duration.

Base charge light does not work

•

Make sure that adapter is connected properly.

•

Make sure the handset is making contact in the cradle.

The empty battery icon appears soon after the batteries are charged

•

Replace the batteries with new ones.

40 of 42

«
...
38
39
40
41
42
»

Summary of Contents for S6000 Series











































Reviews:

No comments

Related manuals for S6000 Series

Brand: NEC Pages: 2

Brand: Panasonic Pages: 8

80-6115-00 - AT&T E5813B - 5.8 GHZ Three Handset Answering System

Brand: VTech Pages: 53

Clarity Extra W1100

Brand: Walker Pages: 27

Brand: Grandstream Networks Pages: 40

Brand: Sagem Pages: 170

Brand: BELGACOM Pages: 33

Brand: Louroe Electronics Pages: 8

Brand: switel Pages: 68

Brand: Blueant Pages: 60

Brand: Linksys Pages: 2

Brand: Husqvarna Pages: 15

Brand: Craftsman Pages: 18

WPU-7700 Enterprise Edition

Brand: UniData Communication Systems Pages: 44

Brand: UniData Communication Systems Pages: 60

Brand: US Robotics Pages: 104

Brand: Telesystem Pages: 2

Brand: Broadview Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands