Oricom S6000 Series Manual Download Page 14

Page: 14 / 42

Recall

This key

is also used for a number of services available from the

telephone network such as call waiting, and for use when connected to
certain telephone phone systems (PBX’S). Details on how o use this
button will be explained by the network service provider. (Refer to
Recall Timing Section)

Adjusting the Handset Ringing Volume

•

Press

Use

to select SOUNDS.

•

Press

. Use

to select HS RINGER.

•

Press

. The display reads VOLUME.

•

Press

. The currently selected volume is displayed.

•

Use to select from

, and OFF.

represents the minimum volume level whereas

represents the maximum volume level.

•

Press

to confirm the selection and exit to VOLUME.

•

To turn off the ringer volume, press

on OFF. The icon on

the display will be turned on.

•

User can also press and hold

during phone ringing or s

to turn off the ringer. To turn on the ringer again, user can press

and hold

tandby

g phone ringing or standby.

urin

Adjusting the Receiver Volume

During a call, user can adjust the receiver volume by pressing

There are 3 levels of receiver volume to choose from: VOLUME 1,
VOLUME 2 and VOLUME 3. VOLUME 1 is the minimum level and
VOLME 3 is the maximum level

•

Press , the current volume level is displayed.

•

Press to increase the volume.

•

Press

to decrease the volume.

Handsfree Operation

Using the Handsfree Speaker

•

Press

for handsfree operation during a call.

•

HANDSFREE is displayed on the second line of the display.

•

The speaker is turned on and user can now talk to the

microphone without holding the handset to the ear.

•

Press

again. The speaker is turned off. User will need to

hold the handset against the ear in order to listen to the caller.

Using a (Optional) Headset

•

Connect the headset to the headset jack on the side of the

handset.

•

The handset receiver and microphone will be turned off.

•

Voice signals are diverted from earpiece of the handset to the

headset.

Microphone Mute / Un-mute

During a call, User can mute the microphone by pressing

. The

icon on the display will turn on. To un-mute, press

again. The

icon on the display will turn off.

14 of 42

Summary of Contents for S6000 Series











































Search results

Summary of Contents for S6000 Series

Reviews:

Related manuals for S6000 Series

Brands by name

Popular brands

Oricom S6000 Series, Manual

Search results

Summary of Contents for S6000 Series

Reviews:

Related manuals for S6000 Series

Brands by name

Popular brands