Moxi Flow
™
User Guide
Page 10
2. Turn the instrument on by pressing the
power button and the
Home
screen will be
displayed. Select a test type by pressing
one of the icons displayed on the screen.
NOTE:
The instrument must be plugged in
to an AC source to run a test. Tests should
not be run on battery power alone.
3. Basic test instructions are presented for all tests (example for “Viability Test” shown to
the left below). For the “Open Flow Cytometry” test, the additional option of setting the
“Fluorescence Gain” is presented (image below/right). Touch the gray box (red arrow in
image) to change this gain. Four options, in order of increasing gain for the fluorescence
signal output, are possible:
Low, Default, Medium, High
. The initial value populated in
this field is determined by the global “Fluorescence Gain” setting that can be set from the
Settings
icon off of the
Home
Screen.
4.
Open the Upper and Lower Doors. Slide a test cassette into the tray and close both
Doors. The Moxi Flow
TM
will automatically perform a calibration step (all tests except
“Size Histogram”) as outlined below. The automated sequence aligns the laser to the
cassette flow cell (“System Calibration”), and prompts the user to open the OUTER door
Note: System status messages are displayed in the black bar at the top of the screen.
