20
EN
RECORD THE ANNOUNCE ONLY MESSAGE
A special announcement (Outgoing message 2) can be recorded for callers when the
Announce Only function is on.
1. Press
MENU
and use
or
to navigate to the Record Outgoing Message 2
submenu. The voice prompt will say “Select to record outgoing message 2” and
will show.
2. Press
MENU
. The voice prompt will say “Start recording after the beep” and a beep
will sound to indicate recording has started.
3. Record the desired announcement. The recording time (in seconds) will show.
4. Press
MENU
to stop recording. The recorded message will play.
SET THE RING DELAY
The Ring Delay function allows you to set the number of rings before the machine answers
a call.
1. Press
MENU
and use
or
to navigate to the ring delay submenu. The voice
prompt will say “Set number of rings” and
will show.
2. Press
MENU
to enter the sub-menu. The voice prompt will announce the current
setting.
3. Press
or
to set TS (Toll Saver: the call is answered after the short toll ring), 2, 4,
6 or 8 rings.
4. Press
MENU
to confirm and exit to standby mode. A beep will sound to indicate the
setting is confirmed.
SET THE TIME
1.
Press
MENU
, then press
TIME
. The voice prompt will read the current time and day
and
will be displayed.
2. The setting for day will flash. (01 indicates Monday, 02 Tuesday etc.)
3. Press
or
to change the setting. The voice prompt will announce the new value.
4. Press
MENU
to confirm.
5. Repeat steps 3 and 4 to set the remaining settings:
•
Hour: 00 to 23 hours.
•
Hour Format: 24hr.
•
Minute: 00 to 59 minutes.
086L004968-026
24/75
REV:1
