15
EN
REPLACING A DIRECTORY ENTRY WITH A CALLER ID ENTRY
Use the same procedure as for
storing Caller ID entries in the directory
CHANGING A STORED NUMBER
Use the same procedure as for
storing a number in the directory
MAKING CALLS FROM THE DIRECTORY
1. Make sure the phone is ON by pressing
TALK
.
2. Press
MEM
.
3. Press the number
(0 - 9)
for the desired memory location. The number dials
automatically.
Or:
1. Make sure the phone is OFF (not in TALK mode).
2. Press
MEM
.
3. Press the number (0-9) or use
CID/VOL
or
to select the desired number.
4. Press
TALK
, the number will be dialed automatically.
REVIEWING AND DELETING DIRECTORY CONTENTS
1. Make sure the phone is OFF (not in TALK mode).
2. Press
MEM
.
3. Use
CID/VOL
or
to scroll through the directory until the desired name/number
is shown, or use the number pad to select a memory location. The selected telephone
number and name show on screen.
4. While the entry is displayed, press
CH/DEL
to delete the entry. The screen shows
“DELETE?”
5. Press
CH/DEL
again to delete the entry. “DELETED” shows on screen.
CHAIN DIALING FROM THE DIRECTORY
Use this feature to make calls that require a sequence of numbers such as using a calling
card for a frequently called long distance number. You can dial each part of the sequence
from a different entry of the directory. The following example shows how you can use chain
dialing to make a call through a long distance service:
*
TONE/EXIT
to return to standby mode.
9. To view your directory, press
MEM
and use
CID/VOL
or
or the number (0-9) to
scroll.
086L004968-026
19/75
REV:1
