14
EN
DIRECTORY
Key Press
1 2 3 4 5 6 7 8 9
1
st
– 5
th
press
A D G J M P T W
2
nd
– 6
th
press
–
B E H K N Q U X
3
rd
– 7
th
press
* C F
I
L O R V Y
4
th
– 8
th
press
!
(
)
$
’
;
S
? Z
3. Press and hold
CH/DEL
, until “DELETE ALL?” shows on screen.
4. Press
CH/DEL
again to confirm. “NO CALLS” shows on screen.
You can store up to 10 names (up to 15 characters) and numbers (up to 24 digits) in the
directory for quick dialing. If a number exceeds 24 digits, you can program it in parts, and
then chain dial the number.
STORE A NUMBER IN THE DIRECTORY
To program a number to memory:
1. Make sure the phone is OFF (not in TALK Mode).
2. Press
MEM
key to start the Memory Programming Mode. “MEMO # --” shows on the
screen.
3. Select the desired memory location (0 – 9) or use the
CID/VOL
or
keys to find
an empty memory location.
4. Press the
MEM
key again. The screen shows “ENTER NAME”.
5. Use the digit keys to enter the name. The cursor advances 1 space after each key
press. Within 1 second, you can press the same key again to select another
character. If you make a mistake, press
CH/DEL
to delete previous characters one by
one.
6. Press
MEM
again to save the name. “ENTER TEL NUMBR” shows on screen.
7. Use the digit keys to enter the desired telephone number. If you make a mistake,
press
CH/DEL
to delete previous digits one by one, then enter the correct digits. If
you wish to add a pause, press
PAUSE
two times at the desired location. Be sure
to press it twice, or you will enter a # (number sign) and not a pause. Each pause
counts as 1 digit in the dialing sequence. Or you can store redial number in the
directory by pressing
REDIAL
(Note If the redial number is longer than 24 digits, it
cannot be stored into the memory.).
8. Press
MEM
again to store the number to memory. If you are replacing a number,
“REPLACE MEMO?” shows on screen. Press
MEM
again to confirm, or press
086L004968-026
18/75
REV:1
