8
EN
INITIAL PROGRAMMING
Before using this telephone, 4 initial settings must be completed on the handset: Lan-
guage, Area code (this is required to use Caller ID service from your telephone company),
Ringer tone, and Tone/Pulse setting.
LANGUAGE SETTING
1. Make sure the phone is OFF (not in TALK mode).
2. Press
FLASH/PROG
until “
1 ENG 2 POR 3 ESP
”
shows on screen.
3. Press
CID/VOL
or
, or the number keys (1 – 3) to select the desired language.
4. Press
FLASH/PROG
to store selection. You will hear a confirmation tone.
AREA CODE SETTING
For proper Caller ID operation, you must program your area code.
1. Make sure the phone is OFF (not in TALK mode).
2. Press
FLASH/PROG
repeatedly until “
AREA CODE
- - -
” shows on screen.
3. Enter your area code using the number keys. To change a digit, press
CH/DEL
and then re-enter the number.
4. Press
FLASH/PROG
to store selection. You will hear a confirmation tone.
RINGER TONE
1. Make sure the phone is OFF (not in TALK mode).
2. Press
FLASH/PROG
repeatedly until “
RINGER TONE 1
” shows on screen.
3. Press
CID/VOL
or
, or press the number keys 1-3 to select the desired ringer
tone.
4. Press
FLASH/PROG
to store selection. You will hear a confirmation tone.
TONE/PULSE SETTING
1. Make sure the phone is off (not in TALK mode).
2. Press
FLASH/PROG
repeatedly until “
1TONE 2 PULSE
” shows on screen.
3. Press
CID/VOL
or
, or press the number keys 1-2 to select TONE or PULSE.
4. Press
FLASH/PROG
to store selection. You will hear a confirmation tone.
086L004968-026
12/75
REV:1
