OrCam User Guide
Version 7
Page
31
text. Make sure to use capital letters in the beginning of each word and type the
word OrCam with capital C as well.
All available commands are available on the OrCam website. Log in to the User
Area using your email address and password, then visit:
http://www.orcam.com/personalization/
Tell Time and Setting the Internal Clock
The OrCam device can announce the current time and date. To activate the
announcement, raise your hand upward with your fist closed and the back of your
hand facing you, as if looking at one’s watch. The OrCam device will announce the
current time. If you keep your hand in place for more than 2 seconds, the OrCam
device will announce the current time, day of the week and the date.
Note
: This feature is enabled by default. It can be adjusted in the "Gesture
Settings" sub-menu in the Audio Settings Menu.
To set the internal clock, please visit the User Area on the OrCam website or visit:
www.orcam.com/timeset
Read the “OrCam Please Set Time” command on the
screen. Click the text to toggle between the Set Time and Tell Time commands.
Read the “OrCam Please Tell Time” command to verify time has been correctly set.
Setup Menu
When the Audio Setting Menu key combo entry is disabled, you will need to use
the “OrCam Please Enter Setup Menu” command to access the Audio Settings
Menu. Using this OrCam Please command is the only method for re-enabling
access via key combo.
OrCam Please Enter Setup Menu