Orcam myeye User Manual Download Page 27

Page: 27 / 48

OrCam User Guide

Version 7

Page

Warning! Battery is running low.

The battery is extremely low and if you do not charge it soon, the device will
automatically shut down.

Battery is too low. Shutting down, please wait.

The battery is too low to enable operation. You must charge the battery and then
restart the device.

Charger connected / disconnected.

The charger is connected / disconnected and OrCam is currently charging / no
longer charging.

No activity. Shutting down.

This occurs automatically after 3 hours of inactivity in suspend mode. You will need
to power the device on when you want to use it again.

OrCam needs to cool down before you can use it; shutting down, please wait.

The temperature of the OrCam device is too high. Please allow it to rest for a few
minutes and resume normal operation. If the problem persists, contact support.

Low light.

You may receive this message in poor lighting conditions.

Pound Note. Please turn to other side for amount.

When recognizing the front side (with the queen's picture) of British Pound notes
the OrCam device will say this message and not the specific amount.

Summary of Contents for myeye

















































Search results

Summary of Contents for myeye

Reviews:

Related manuals for myeye

Brands by name

Popular brands

Orcam myeye, User Manual

Search results

Summary of Contents for myeye

Reviews:

Related manuals for myeye

Brands by name

Popular brands