OrCam User Guide
Version 7
Page
19
OrCam device identifies new text below the original section, it announces
"Resuming from" and continues reading from where it left off.
This also occurs when it identifies additional text at the bottom of the frame that it
cannot see. When it reaches the end of the page or section, it announces: “There
may be more text below. Please raise the text and point again.” In this case, you
can point to the lower part of the page, and the OrCam device begins reading
from the beginning of the last paragraph.
Reading Navigation
Reading Navigation allows you skip forward, backward, or pause while reading
text. Pressing the Trigger button will stop the reading. When enabled, pressing
both Volume buttons at the same time will enter a pause state and a beep will
sound intermittently while paused. Pressing both Volume buttons again will
continue the reading from where you left off. The length of the pause time can be
personalized.
When enabled, while the device is reading, pressing the Trigger button and
simultaneously pressing the Volume Up button will skip to the next punctuation
mark (period, comma, question mark, etc.) or simultaneously pressing the Volume
Down button will skip to the previous punctuation mark.
Note
: Reading Navigation is disabled by default. It can be adjusted in the
"Reading Settings" sub-menu in the Audio Settings Menu.
Fails to Recognize Product or Text
If the OrCam device does not recognize what it sees, it lets you know by making a
chime sound. If you hear a chime, try again, and make sure that you are pointing
at English text or a pre-entered product.